| Model | ST8001-1/ST8001-2/ST9001-1/ST9001-2 |
| Quality Certification: | ce |
| Instrument classification: | Class II |
| size: | 4ml/5ml/10ml |
| Disinfecting Type: | Sampling Tube |
【5ml/10Blood Specimen Tubesml PP Material High Impact Resistance Instructions】
1. According to sampling requirements, use sampling swabs to collect samples (for preservation solution without swabs, users can provide matching swabs by themselves).
2. Place the sampling swab after collecting the sample into the sampling tube.
3. Break the swab at the easy-to-break cut point of the sampling swab rod, discard the tail, and close the tube cap
4. Mark the information as required on the label of the sampling tube.
5. After collection, the specimen should be transported to the corresponding influenza surveillance network laboratory within 2 working days, and the storage temperature should be 2-8℃; if it cannot be sent to the laboratory within 48 hours, it should be stored at -70℃ or below. And to ensure that the collected specimens are sent to the corresponding network laboratory within 1 week. Specimens should avoid repeated freezing and thawing.
6. Nasal swab, the collector's left hand holds the patient's mandible, the right hand swab is gently inserted into the nasal passage and the nasal palate, stays for a while, slowly rotates 3-5 times and then exits. Wipe the abnormal hole on the other side with another swab. Immerse the swab head in the sampling solution, squeeze the swab head in the sampling solution several times, forcefully break off the tail of the swab, and discard the tail of the swab.
7. With a throat swab, press the patient's tongue with a tongue depressor with the left hand. Hold the swab in the right hand to wipe the bilateral pharyngeal tonsils and posterior wall of the pharynx, immerse the swab head in the sampling solution and squeeze the swab head in the sampling solution several times, forcefully break the tail of the swab, and discard the tail of the swab. You can also collect the nasal and throat swabs in the same sampling tube.
