| model | CT90 Dry sterilizer |
| capacity | 90 liter |
| Dimensions (length × width × height) | 660mm×640mm×1000mm |
| Sterilization chamber size (diameter × height) | Ф400mm×730mm |
| rated power | 3400W |
| Rated voltage | 220V±10%50Hz |
| Temperature display accuracy | 0.1℃ |
| working environment | 5℃～40℃,Relative humidity 10%～85% |
| Sterilization chamber material | SUS304 stainless steel |
| Sterilization working temperature | 105℃～138℃ |
| Sterilization time preset range | 1 minute～6000 minutes |
| Preset range of melting temperature | 60℃～100℃ |
| Preset range of melting time | 1 minute～6000 minutes |
| Preset range of holding temperature | 45℃～60℃ |
| Preset range of holding time | 1 minute～9999 minutes |
| Cooling lock opening temperature range | solid,agar and waste models 40℃～99℃,Liquid mode 40℃～80℃ |
| Exhaust temperature preset range | 73℃—104℃ |
| Preset range of door opening temperature | solid,agar and waste models 40℃～99℃,Liquid mode 40℃～80℃ |
Automatic Autoclave Sterilizer Sterilization mode :
◆ Solid mode: heating → sterilization → exhaust, air cooling
◆ Solid belt drying mode: heating → sterilization → drainage, exhaust → drying
◆ Liquid mode: heating → sterilization → pre-cooling → exhaust
◆ Liquid belt insulation mode: heating → sterilization → pre-cooling → exhaust → heat preservation
◆ Waste mode: heating → sterilization → exhaust, air cooling
◆ Agar mode: heating → melting → heat preservation
Automatic Autoclave Sterilizer Other optional accessories
◆ Printer: Real-time printing of sterilization temperature, pressure, time and other status data to monitor the sterilization status.
◆ Automatic drying (only available for CT-C model, CT-A model can be purchased): After sterilization, it will automatically dry and dry thoroughly to achieve the CE effect.
◆ Air filtration (only available for drying models): 0.2μm air filter is provided. After the sterilization is completed, the outside air enters the cavity after filtration, which can achieve rapid drying under aseptic conditions.
◆ Automatic water intake (only available for CT-B and CT-C models): The water tank can automatically replenish water to the cavity to avoid the inconvenience of frequent water filling. At the same time, it is equipped with a water level sensor, which automatically stops and alarms when water is lacking.
◆ 3Q/4Q verification service: verification cases of many well-known domestic pharmaceutical companiescosmetics companies.
